IPitomy Communications

If you have another device handing out DHCP on the same network and aren't using the IP1000 as your router you must first disconnect the IP1000 from the main network and hook a computer directly up to the IP1000 on your own network.

Steps to changing Titan (analog interface on the IP1000) Reservation

1. You need to login to your IP1000
2. navigate to Networking > TCP/IP Settings. Scroll down to DHCP Server Setting and click on DHCP Reservation.
3. On the DHCP Reservation popup screen you wil see Reservation for Titan Set your Start and End IP to a 2 IP range that is not being used on the main network.
4. Click Modify and close the popup screen.
5. On the TCP/IP Settings page click save changes and the system will reboot.
6. Hook the IP1000 back up to the main network and any IP conflicts should be resolved.